TRC is primarily funded by ad revenue. If you like the content you find here, don't block the ads check them out instead. Thank you.
Page 7 of 7 FirstFirst ... 567
Results 91 to 100 of 100

Thread: Suzuki GT250B - Winter project 2017

  1. #91
    At Work
    Join Date
    Feb 2008
    Location
    Essex
    Posts
    1,255
    Like
    71
    Liked 303 in 179 posts

    Default Re: Suzuki GT250B - Winter project 2017


    TRC is primarily funded by ad revenue. If you like
    the content you find here, don't block the ads check
    them out instead. Thank you.
    Chelmsford, alternate for Tuesday was a ride on the Tuono if it's nice and that could be towards Tunbridge Wells. For my 50th 5 years ago I did a days green laning round Essex on my DT175, did about 60 miles and ended up wet, muddy and cold, really enjoyed it.

    I'll bring the Rioja.


  2. TRC is primarily funded by ad revenue. If you like the content you find here, don't block the ads check them out instead. Thank you.
  3. #92
    At Work Pugwash's Avatar
    Join Date
    Jan 2008
    Location
    The High Seas
    Posts
    1,168
    Like
    257
    Liked 200 in 72 posts

    Default Re: Suzuki GT250B - Winter project 2017

    This week I have been mainly finding out that just because a carb kit says it is for a 1977 Suzuki GT250, doesn't mean that it is. They've gone back to the seller for a refund.

    My tip for the week is that when you spend time repainting your switch gear, and then re-assemble it, having left it somewhere warm for three days to harden off, make sure you tape it all up before you put the actual switch gear back inside the cases, otherwise you will chip off the paint that you have painstakingly applied. Do not ask me how I know

  4. #93
    At Work
    Join Date
    Feb 2008
    Location
    Essex
    Posts
    1,255
    Like
    71
    Liked 303 in 179 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Having seen it in real life , it looks good (even the wife thinks so) did you laquer over the switches once you'd done the red?

    Pity about the carb Kit, strange that not one bit matches. Still waiting for mine from Germany for the Guzzi.

    Inspired by my visit, I've now bought a dental pick set (get those tricky rubber bits out the carbs) and a wheel balance frame like yours. Not got an immediate use for it but I'm sure it will come in handy, as two tyre changes ago the tyre place didn't balance the front wheel properly and the vibration was dreadful in Germany at 120mph on the autobahn. So now I can do the Tuono, Le Mans and DT just for the fun of it.

  5. #94
    At Work Pugwash's Avatar
    Join Date
    Jan 2008
    Location
    The High Seas
    Posts
    1,168
    Like
    257
    Liked 200 in 72 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Lacquered it all, but it was such a pig refitting the switchgear that the two halves rubbed together and took a patch off. If I'd put a bit of tape around the casing it would have been fine.

    I've just ordered a pair of long nose circlip pliers, as I've just spent an hour trying to refit the m/cylinder piston without success. Now going to go for a walk with the dogs and ponder on the pointlessness of existing in relation to restoring motorcycles.

  6. The following 2 users liked this useful post by Pugwash:


  7. #95
    At Work Pugwash's Avatar
    Join Date
    Jan 2008
    Location
    The High Seas
    Posts
    1,168
    Like
    257
    Liked 200 in 72 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Been a bit quiet lately, so here's a quick Christmas update.

    I've rebuilt the forks with the new stanchions, replaced the steering head bearings, re-bushed the swing arm, and rebuilt the ironmongery on the front and back wheels. The Master cylinder and the front caliper have been done, and are awaiting fitting.

    A fairly pristine back mudguard came up on Fleabay recently, and using my tried and tested "bid last moment and ridiculously high" strategy in the hope that I'll get it for a reasonable price, I secured it. Unfortunately I wasn't the only one using this strategy, and I won it by a fiver, thus now owning the most expensive second hand chromed mudguard in the world Don't ask how much, as if Mrs Pugwash finds out I'm a dead man.

    Next up is an initial assembly to make sure I've got everything, and to replace the odd sized bolts that have found their way onto the bike in the last 40 years.

    After Christmas I'm going to start on the engine. I've had the top off already, but I'll dismantle the whole caboodle and get the cases vapour blasted, before getting the crank rebuilt, and the clutch sorted.

    Happy days!

  8. The following 6 users liked this useful post by Pugwash:


  9. #96
    Really Bored Druid's Avatar
    Join Date
    Jan 2008
    Location
    Co Durham
    Posts
    3,262
    Like
    101
    Liked 377 in 209 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Quote Originally Posted by Pugwash View Post

    Next up is an initial assembly to make sure I've got everything, and to replace the odd sized bolts that have found their way onto the bike in the last 40 years.
    I replaced most of the bolts on my GS750 with stainless steel ones, so I have quite a large selection of period Suzuki bolts. Post a list of what you need and I'll see what I can match up for you

  10. The following 6 users liked this useful post by Druid:


  11. #97
    At Work Pugwash's Avatar
    Join Date
    Jan 2008
    Location
    The High Seas
    Posts
    1,168
    Like
    257
    Liked 200 in 72 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Quote Originally Posted by Druid View Post
    I replaced most of the bolts on my GS750 with stainless steel ones, so I have quite a large selection of period Suzuki bolts. Post a list of what you need and I'll see what I can match up for you
    I'll be in touch......

  12. #98
    At Work Pugwash's Avatar
    Join Date
    Jan 2008
    Location
    The High Seas
    Posts
    1,168
    Like
    257
    Liked 200 in 72 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Well it's been a while, but after a delay while I replaced the fork seals and powdercoated the lowers on the VFR, and even longer while the temperature was sub zero, I've at last got back into the garage, and I'm now working on the engine.

    The plan is to have the crank rebuilt, new clutch, and to have the engine cases vapour blasted. I'm going to get the bores checked, and if necessary I'lltake it out to +0.5 rebore. I don't really have accurate enough tools to check it myself, although it looks and feels ok. Maybe I'll see an internal micrometer at the car boots this year.

    The crank was gummed up and varnished by old 2 stroke and fuel that was sitting in the crank pit. I've cleaned it, and it all feels good, but the seals must be buggered after 40 years, so it needs to be sorted. if anyone has a recommendation for a good crank man, please let me know! I have a local guy who rebuilds car engines, but I don't know how keen he'll be on a 40 year old smoker.

    The lift I scored off Didge is making it a lot easier on my back . Thanks mate!

  13. The following 2 users liked this useful post by Pugwash:


  14. #99
    Really Bored Druid's Avatar
    Join Date
    Jan 2008
    Location
    Co Durham
    Posts
    3,262
    Like
    101
    Liked 377 in 209 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Alpha Bearings for your crank. Horrible website but they will do a good job on your crank. They're in Netherton in the west Midlands so not exactly local to you though.

  15. The following user liked this post made by Druid:


  16. #100
    At Work iansoady's Avatar
    Join Date
    Feb 2008
    Location
    Birmingham
    Posts
    1,073
    Like
    85
    Liked 220 in 119 posts

    Default Re: Suzuki GT250B - Winter project 2017

    Another midland place is Nametab Engineering in Redditch. Did an excellent job reboring my Arrow.

    http://www.nametabengineering.com/services/

  17. The following user liked this post made by iansoady:


Page 7 of 7 FirstFirst ... 567
Go Back to Forum My Forum