Results 1 to 12 of 12

Thread: Delkevic

  1. #1
    A Bit Bored iainpi's Avatar
    Join Date
    Dec 2014
    Posts
    84
    Like
    27
    Liked 51 in 19 posts

    Default Delkevic

    Just wondering if anyone has tried one of these.

    Just been tempted to buy something for the bike and these are pretty cheap and seem to look good

    Er6f

    Getting fed up of filtering after someone with a loud exhaust only for the car to move back when the other bike has gone through...

    Sent from my Moto G (5S) Plus using Tapatalk

  2. #2
    At Work asmethurst's Avatar
    Join Date
    Jul 2010
    Location
    Krayville
    Posts
    1,372
    Like
    757
    Liked 224 in 179 posts

    Default Re: Delkevic

    I have one on my Bandit - come with a removable baffle - aesthetics more than anything else .
    Nice sound but not too noisy

  3. #3
    Should Get Out More the phantom pieman's Avatar
    Join Date
    Jan 2008
    Location
    Brighton-ish
    Posts
    10,667
    Like
    1,422
    Liked 1,017 in 679 posts
    Blog Entries
    1

    Default Re: Delkevic

    They are not a premium brand .... if that matters to you ...
    But those who have them seem to like them ...

  4. The following user liked this post made by the phantom pieman:


  5. #4
    Should Get Out More Editor's Avatar
    Join Date
    Dec 2007
    Posts
    23,942
    Like
    9,286
    Liked 1,431 in 1,001 posts
    Blog Entries
    44

    Default Re: Delkevic

    I bought a set of SS downpipes for my ancient CBR6 made by them. Fortunately there were the two of us on the fitting job, one a metal working engineer. It took some applied force with a broomhandle & a rubber mallet to get them on, but almost certainly due to my mate, it didn't actually take that long. To their credit they're still doing their job with not a hint of corrosion nearly a decade later.

    So fitment might have been my concern.

    FWIW on the same bike I have a Leo Vinci SBK-old circular one. Now that's a thing of titanium quality & no mistake. Must be 1/3 of the mass of the oe. Adam who was behind me reports that it's fine at lower revs but really quite fruity when going for it.

    Anyhow it's loud enough to get most of the muppets on foot out of the way on a hot day during summer in Whitby, & a blip clears the rest.

    I really cannot see the point of buying a brand new end can, when you can get premium for not a lot off ebay.

  6. #5
    Really Bored egypt220's Avatar
    Join Date
    Dec 2007
    Location
    Raunds or bloody work
    Posts
    4,028
    Like
    80
    Liked 115 in 72 posts

    Default Re: Delkevic

    I had a full system on my cb500 (Alloy can) medium length, the system out lasted the bike I put it on at 78,000 ish and was still going at 254,000 all be it a bit noisier.
    Had a carbon can on my VfR 750 work bike too.

    All depends on what you want really a cheap can to make a bit of noise or a midrange can like an arrow which will sound more fruity.
    Having been a courier in London and across the south east I don't really think a can will make that much difference unless you are going to rev it every 2 seconds.
    I find I nice HID light kit helps as it shines in the mirrors and it can be seen, most car drivers in town are on the phone or have their music to loud or just don't give a fuck.

    Just think high beam and blip blip.

  7. The following user liked this post made by egypt220:


  8. #6
    Should Get Out More Taipan's Avatar
    Join Date
    Dec 2007
    Location
    Boerthal's hill
    Posts
    44,292
    Like
    12,007
    Liked 7,539 in 3,956 posts

    Default Re: Delkevic

    My SV650 came to me with me of these fitted. To be honest, its finish seemed to be holding up better than Suzukis!

  9. The following user liked this post made by Taipan:


  10. #7
    Should Get Out More Makman's Avatar
    Join Date
    Feb 2008
    Location
    Barking at the moon.
    Posts
    8,022
    Like
    2,825
    Liked 1,460 in 901 posts

    Default Re: Delkevic

    SP Engineering are nice enough too, if you can find that 2nd hand...

  11. The following user liked this post made by Makman:


  12. #8
    Should Get Out More Julian_Boolean's Avatar
    Join Date
    Jan 2008
    Location
    Nearly at the dawn of Britain
    Posts
    13,594
    Like
    810
    Liked 2,384 in 1,418 posts

    Default Re: Delkevic

    On Z1000s they're reckoned to be well made but a little restrictive, but we're talking about stupidly tuned Z1000s here, they look like a copy of the Kerker street pipe.

    Sent from my SM-T560 using Tapatalk

  13. #9
    Should Get Out More a_morti's Avatar
    Join Date
    Jan 2008
    Location
    Gibraltar
    Posts
    11,653
    Like
    1,231
    Liked 936 in 605 posts

    Default Re: Delkevic

    Have an eBay search er6 demon.

  14. #10
    Not Much To Do
    Join Date
    Apr 2008
    Location
    over Waterley Cross way
    Posts
    775
    Like
    10
    Liked 124 in 70 posts

    Default Re: Delkevic

    I've got a Delkevic on my Serow. Quality seems good, no problems fitting it, and it's got a removable baffle. In, it's louder than standard but tolerable; out, a bit embarrassing for a little bike.

  15. #11
    A Bit Bored iainpi's Avatar
    Join Date
    Dec 2014
    Posts
    84
    Like
    27
    Liked 51 in 19 posts

    Default Re: Delkevic

    Thanks,

    I've looked on eBay and not found any second hand exhausts. I did look...

    It's the 2012 version of er6, I think you have to replace with a full system no slip on. The likes of scorpion, termi, akro etc are 500 ish or more and I don't really want to spend that on this bike. 250 I could prossibly convince myself.





    Sent from my Moto G (5S) Plus using Tapatalk

  16. #12
    Should Get Out More 1888's Avatar
    Join Date
    Mar 2010
    Location
    JockLand
    Posts
    26,334
    Like
    793
    Liked 2,579 in 1,870 posts

    Default Re: Delkevic

    Does it have to be ER6 you search for? Would one the same link diameter not do then get the bike tuned if needed.

  17. The following user liked this post made by 1888:


Go Back to Forum My Forum