TRC is primarily funded by ad revenue. If you like the content you find here, don't block the ads check them out instead. Thank you.
Results 1 to 10 of 10

Thread: Brush paint

  1. #1
    At Work
    Join Date
    Jan 2011
    Location
    Hertfordshire
    Posts
    1,550
    Like
    964
    Liked 466 in 277 posts

    Default Brush paint


    TRC is primarily funded by ad revenue. If you like
    the content you find here, don't block the ads check
    them out instead. Thank you.
    I need to paint a 8mm OD tubular roll cage for a RC truck,
    I would prefer to brush paint it as I think it will be more
    hard wearing as it will go on thicker and also will be easier
    to touch up.

    Can anyone recommend a good brush paint, would like
    to keep brush strokes to a minimum but realize there
    will be some.


  2. #2
    Really Bored
    Join Date
    Feb 2008
    Posts
    2,074
    Like
    10
    Liked 402 in 209 posts

    Default Re: Brush paint

    Hammerite, nothing more hard wearing.

  3. The following 2 users liked this useful post by scud:


  4. #3
    At Work
    Join Date
    Feb 2008
    Location
    Essex
    Posts
    1,439
    Like
    78
    Liked 471 in 250 posts

    Default Re: Brush paint

    I would have thought Humberol would be ideal for a small area. https://www.humbrol.com/uk-en/shop/p...el-paints.html

  5. The following user liked this post made by GuzziPaul:


  6. #4
    Should Get Out More Ant's Avatar
    Join Date
    Oct 2009
    Location
    Sausagechester
    Posts
    18,348
    Like
    191
    Liked 1,382 in 980 posts

    Default Re: Brush paint

    Depending on the final colour you want, add some lead oxide or lead carbonate to the paint. It'll be the hardest wearing paint ever.

  7. The following user liked this post made by Ant:


  8. #5
    At Work
    Join Date
    Jan 2011
    Location
    Hertfordshire
    Posts
    1,550
    Like
    964
    Liked 466 in 277 posts

    Default Re: Brush paint

    Totally forgot about Humbrol, will order a small tin to see what its like
    Will use Hammerite if I don't like the Humbrol

  9. #6
    At Work
    Join Date
    Jan 2011
    Location
    Hertfordshire
    Posts
    1,550
    Like
    964
    Liked 466 in 277 posts

    Default Re: Brush paint

    Humbrol was quite expensive considering the small amount of paint you get
    so I went with Hammerite Smooth Black but it was horrible and, did not go on at all well.
    It was all streaky and in many places would not cover the original red paint or bare steel,
    the Cage was properly prepared before painting and the Hammerite mixed well too.
    So I wiped the Hammerite mess off the Cage using IPA and then
    tried an old tin of Rustins Small Job black gloss (which I remembered I had straight after buying the Hammerite)
    I had and that went on lovely.
    One coat would have been enough but I gave it two to cover any parts I didn't get first time round.


  10. The following user liked this post made by Eclipse:


  11. #7
    Should Get Out More Cousin Jack's Avatar
    Join Date
    Jan 2008
    Location
    Down in the Duchy (at last)
    Posts
    17,035
    Like
    4,818
    Liked 2,962 in 2,006 posts

    Default Re: Brush paint

    Quote Originally Posted by Eclipse View Post
    Humbrol was quite expensive considering the small amount of paint you get
    so I went with Hammerite Smooth Black but it was horrible and, did not go on at all well.
    It was all streaky and in many places would not cover the original red paint or bare steel,
    the Cage was properly prepared before painting and the Hammerite mixed well too.
    So I wiped the Hammerite mess off the Cage using IPA and then
    tried an old tin of Rustins Small Job black gloss (which I remembered I had straight after buying the Hammerite)
    I had and that went on lovely.
    One coat would have been enough but I gave it two to cover any parts I didn't get first time round.
    Modern Hammerite is pants, they have changed the formula, and not for the better.

  12. The following user liked this post made by Cousin Jack:


  13. #8
    Should Get Out More Big Pete's Avatar
    Join Date
    May 2008
    Location
    Ilkeston
    Posts
    8,093
    Like
    1,906
    Liked 1,247 in 720 posts

    Default Re: Brush paint

    sadly true, it's a lot harder to get a decent finish with the new stuff.

  14. #9
    Should Get Out More 1888's Avatar
    Join Date
    Mar 2010
    Location
    JockLand
    Posts
    26,833
    Like
    867
    Liked 2,817 in 2,016 posts

    Default Re: Brush paint

    Would powdercoating that not have been cost effective. Company called ARC-RITE do a gloss chassis paint that is tough also Rustoleum paint is quite tough and brushes on.

  15. #10
    Should Get Out More
    Join Date
    Jan 2008
    Location
    Yorkshire
    Posts
    7,019
    Like
    35
    Liked 1,467 in 930 posts

    Default Re: Brush paint

    Japlac used to be the paint of choice in the old days.

Go Back to Forum My Forum

TRC Affiliates - Help TRC make a small amount of commission