TRC is primarily funded by ad revenue. If you like the content you find here, don't block the ads check them out instead. Thank you.
Page 1 of 3 123 LastLast
Results 1 to 15 of 43

Thread: d.i.d chains

  1. #1
    Really Bored vimtozz's Avatar
    Join Date
    Sep 2014
    Location
    West London
    Posts
    2,696
    Like
    266
    Liked 863 in 418 posts
    Blog Entries
    1

    Default d.i.d chains


    TRC is primarily funded by ad revenue. If you like
    the content you find here, don't block the ads check
    them out instead. Thank you.
    Why the .. do i have to rivet the chain?

    I expected it to be a simple job like before with just a clip but apparently it requires riveting using their 100 tool

    Must i buy this tool or are there other methods, cheaper tools?

  2. #2
    Should Get Out More MyLittleStudPony's Avatar
    Join Date
    Dec 2007
    Posts
    28,709
    Like
    2,865
    Liked 2,581 in 1,505 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    I think there are much cheaper chain tools which should do the job. I'm sure I did it with two hammers many years ago but I'm canny canny like. Some people say a spring clip link is fine but it'd worry me.

    edit - that was in response to your first post. 15 quid seems about the bottom price for a chain tool. Back in my day cheapt tools were shit but they may be ok these days.

  3. #3
    Should Get Out More 1888's Avatar
    Join Date
    Mar 2010
    Location
    JockLand
    Posts
    27,466
    Like
    932
    Liked 3,056 in 2,177 posts

    Default Re: d.i.d chains

    Buy a split link. Drama queens will tell you rivits are saver but still have both my feet.

  4. The following 2 users liked this useful post by 1888:


  5. #4
    Really Bored vimtozz's Avatar
    Join Date
    Sep 2014
    Location
    West London
    Posts
    2,696
    Like
    266
    Liked 863 in 418 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    Would this be sufficient? because i can prime it. https://www.amazon.co.uk/Motorcycle-...ain+rivet+tool

    or should i try source this? http://www.demon-tweeks.co.uk/Produc...54KhoCpffw_wcB

  6. #5
    Should Get Out More Yorick's Avatar
    Join Date
    Jan 2008
    Location
    Lanzarote
    Posts
    41,739
    Like
    7,281
    Liked 6,844 in 4,263 posts
    Blog Entries
    6

    Default Re: d.i.d chains

    Quote Originally Posted by 1888 View Post
    Buy a split link. Drama queens will tell you rivits are saver but still have both my feet.
    I wouldn't feel very safe with a split link and 180 gee gees

  7. #6
    Should Get Out More Screwdriver's Avatar
    Join Date
    Dec 2007
    Posts
    16,669
    Like
    607
    Liked 5,944 in 2,784 posts

    Default Re: d.i.d chains

    I've always used two hammers. Then again, I have a lot of hammers.

  8. #7
    Really Bored vimtozz's Avatar
    Join Date
    Sep 2014
    Location
    West London
    Posts
    2,696
    Like
    266
    Liked 863 in 418 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    Quote Originally Posted by Screwdriver View Post
    I've always used two hammers. Then again, I have a lot of hammers.
    How do you use 2 hammers while holding the rivet thing with the chains on the bike and not on a flat surface?

  9. #8
    Should Get Out More KungFooBob's Avatar
    Join Date
    Aug 2012
    Location
    The Forest Moon of Endor
    Posts
    18,379
    Like
    459
    Liked 8,465 in 4,780 posts

    Default Re: d.i.d chains

    I always fitted a split link and then rode to my local friend bike shop for them to peen the soft link correctly.

  10. #9
    Should Get Out More Screwdriver's Avatar
    Join Date
    Dec 2007
    Posts
    16,669
    Like
    607
    Liked 5,944 in 2,784 posts

    Default Re: d.i.d chains

    Quote Originally Posted by vimtozz View Post
    How do you use 2 hammers while holding the rivet thing with the chains on the bike and not on a flat surface?
    Skillz.

  11. The following 2 users liked this useful post by Screwdriver:


  12. #10
    Really Bored vimtozz's Avatar
    Join Date
    Sep 2014
    Location
    West London
    Posts
    2,696
    Like
    266
    Liked 863 in 418 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    Quote Originally Posted by Screwdriver View Post
    Skillz.
    coool ceya later today.

  13. #11
    Should Get Out More 1888's Avatar
    Join Date
    Mar 2010
    Location
    JockLand
    Posts
    27,466
    Like
    932
    Liked 3,056 in 2,177 posts

    Default Re: d.i.d chains

    Quote Originally Posted by Yorick View Post
    I wouldn't feel very safe with a split link and 180 gee gees
    That is very interesting Walter but Vim does not have 180 gee gees does he?

  14. #12
    Really Bored vimtozz's Avatar
    Join Date
    Sep 2014
    Location
    West London
    Posts
    2,696
    Like
    266
    Liked 863 in 418 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    Quote Originally Posted by 1888 View Post
    That is very interesting Walter but Vim does not have 180 gee gees does he?
    nope, dont even have 80 lol. 70hp is my dyno result.

  15. #13
    Should Get Out More Julian_Boolean's Avatar
    Join Date
    Jan 2008
    Location
    1985
    Posts
    16,888
    Like
    1,364
    Liked 3,869 in 2,378 posts

    Default Re: d.i.d chains

    My Z1100 has a split link on it's 630 chain. Split links are fine, if the ends of the pins have any load on them your chain is seriously out of alignment.

  16. The following user liked this post made by Julian_Boolean:


  17. #14
    Really Bored burty's Avatar
    Join Date
    Jan 2009
    Location
    Medway Taahns Innit
    Posts
    3,428
    Like
    93
    Liked 231 in 174 posts
    Blog Entries
    1

    Default Re: d.i.d chains

    Fitting a rivet link is really quite simple. I have used two hammers many times, also cheap and more expensive rivet tools. By far the easiest is the expensive rivet tools but cheap ones work well enough for several chains, and using two hammers also work but you may need some instruction if you are asking about it here. Take care and make sure you know what you are doing as the consequence of failure could be life threatening.

  18. #15
    Should Get Out More ink ink's Avatar
    Join Date
    Jan 2008
    Posts
    29,137
    Like
    209
    Liked 4,321 in 2,896 posts
    Blog Entries
    4

    Default Re: d.i.d chains

    Quote Originally Posted by Julian_Boolean View Post
    My Z1100 has a split link on it's 630 chain. Split links are fine, if the ends of the pins have any load on them your chain is seriously out of alignment.
    What spring links can't handle is hitting things or being fitted backwards.

Page 1 of 3 123 LastLast
Go Back to Forum My Forum

TRC Affiliates - Help TRC make a small amount of commission